The Allureglow USA PS-1000-FL-PP Ink is a Fluorescent Pink Ink that emits Pink Under Blacklights. All of the PS-1000-FL Inks are manufactured using only Phthalate Free Plasticizers and are compliant with all State and Federal Regulations concerning Phthalates.

The PS-1000-FL Inks, enable the screen printer to print on either light or dark garments. This Ink can also be used on all types of fabrics and with the addition of our AG-CLA-100 Additive you can print on Polyesters Fabrics. Consult SDS prior to using.

Directions and Helpful Information:

The PS-1000-FL Inks are a  Single Component Ready to Use Ink, just mix it up and it is ready to use. Mixing should be done with a high speed drill or drill press using a Type 2 Dispersion Blade. Continue to mix Ink occasionally throughout production run.

Keep lids on containers to avoid contamination and drying of the Ink.

The use of a Lint Catcher or Overcoat Clear for Dark Fabrics will aid in uninterrupted production and reduce fibrillation. Create a single screen by combining all of the colors in the image to be printed on a dark 100% cotton fabric. Print using a suitable Primer Clear through a 230 mesh count and then flash cure.

The Use as a White Underbase is a must on All Garment Colors other than White.

Use a 110-280 Mesh Screens and a Print/Flash/Print maybe required on some Materials to deal with High Fibrillation and depending on the color you are trying to achieve.

For Best Results A Heavy Flood and Slow to Moderate Squeegee Pressure on Automatic Presses and Heavy Flood and Light to Moderate Squeegee Pressure on Manual Presses is recommended. A Print /Flash/Print Method will achieve the best results

Cure Ink at 320°-340°F (160°-170°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 90 to 180 seconds, depending on amount of ink deposit and color of garment.

Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.

Clean-Up can be done using Bio-Degradable Screen Wash

Re-Use or Dispose of any Unused Ink Properly

Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.

Manufactured By: Allureglow USA Inc. and Allureglow USA Inc. makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. (888) 493-4569 or www.allureglowusa.com

The Allureglow USA PS-1000-FL-PP Ink is a Fluorescent Pink Ink that emits Pink Under Blacklights. All of the PS-1000-FL Inks are manufactured using only Phthalate Free Plasticizers and are compliant with all State and Federal Regulations concerning Phthalates.

The PS-1000-FL Inks, enable the screen printer to print on either light or dark garments. This Ink can also be used on all types of fabrics and with the addition of our AG-CLA-100 Additive you can print on Polyesters Fabrics. Consult SDS prior to using.

Directions and Helpful Information:

The PS-1000-FL Inks are a  Single Component Ready to Use Ink, just mix it up and it is ready to use. Mixing should be done with a high speed drill or drill press using a Type 2 Dispersion Blade. Continue to mix Ink occasionally throughout production run.

Keep lids on containers to avoid contamination and drying of the Ink.

The use of a Lint Catcher or Overcoat Clear for Dark Fabrics will aid in uninterrupted production and reduce fibrillation. Create a single screen by combining all of the colors in the image to be printed on a dark 100% cotton fabric. Print using a suitable Primer Clear through a 230 mesh count and then flash cure.

The Use as a White Underbase is a must on All Garment Colors other than White.

Use a 110-280 Mesh Screens and a Print/Flash/Print maybe required on some Materials to deal with High Fibrillation and depending on the color you are trying to achieve.

For Best Results A Heavy Flood and Slow to Moderate Squeegee Pressure on Automatic Presses and Heavy Flood and Light to Moderate Squeegee Pressure on Manual Presses is recommended. A Print /Flash/Print Method will achieve the best results

Cure Ink at 320°-340°F (160°-170°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 90 to 180 seconds, depending on amount of ink deposit and color of garment.

Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.

Clean-Up can be done using Bio-Degradable Screen Wash

Re-Use or Dispose of any Unused Ink Properly

Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.

Manufactured By: Allureglow USA Inc. and Allureglow USA Inc. makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. (888) 493-4569 or www.allureglowusa.com

The Allureglow USA PS-1000-FL-PP Ink is a Fluorescent Pink Ink that emits Pink Under Blacklights. All of the PS-1000-FL Inks are manufactured using only Phthalate Free Plasticizers and are compliant with all State and Federal Regulations concerning Phthalates.

The PS-1000-FL Inks, enable the screen printer to print on either light or dark garments. This Ink can also be used on all types of fabrics and with the addition of our AG-CLA-100 Additive you can print on Polyesters Fabrics. Consult SDS prior to using.

Directions and Helpful Information:

The PS-1000-FL Inks are a  Single Component Ready to Use Ink, just mix it up and it is ready to use. Mixing should be done with a high speed drill or drill press using a Type 2 Dispersion Blade. Continue to mix Ink occasionally throughout production run.

Keep lids on containers to avoid contamination and drying of the Ink.

The use of a Lint Catcher or Overcoat Clear for Dark Fabrics will aid in uninterrupted production and reduce fibrillation. Create a single screen by combining all of the colors in the image to be printed on a dark 100% cotton fabric. Print using a suitable Primer Clear through a 230 mesh count and then flash cure.

The Use as a White Underbase is a must on All Garment Colors other than White.

Use a 110-280 Mesh Screens and a Print/Flash/Print maybe required on some Materials to deal with High Fibrillation and depending on the color you are trying to achieve.

For Best Results A Heavy Flood and Slow to Moderate Squeegee Pressure on Automatic Presses and Heavy Flood and Light to Moderate Squeegee Pressure on Manual Presses is recommended. A Print /Flash/Print Method will achieve the best results

Cure Ink at 320°-340°F (160°-170°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 90 to 180 seconds, depending on amount of ink deposit and color of garment.

Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.

Clean-Up can be done using Bio-Degradable Screen Wash

Re-Use or Dispose of any Unused Ink Properly

Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.

Manufactured By: Allureglow USA Inc. and Allureglow USA Inc. makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. (888) 493-4569 or www.allureglowusa.com

The Allureglow USA PS-1000-FL-PP Ink is a Fluorescent Pink Ink that emits Pink Under Blacklights. All of the PS-1000-FL Inks are manufactured using only Phthalate Free Plasticizers and are compliant with all State and Federal Regulations concerning Phthalates.

The PS-1000-FL Inks, enable the screen printer to print on either light or dark garments. This Ink can also be used on all types of fabrics and with the addition of our AG-CLA-100 Additive you can print on Polyesters Fabrics. Consult SDS prior to using.

Directions and Helpful Information:

The PS-1000-FL Inks are a  Single Component Ready to Use Ink, just mix it up and it is ready to use. Mixing should be done with a high speed drill or drill press using a Type 2 Dispersion Blade. Continue to mix Ink occasionally throughout production run.

Keep lids on containers to avoid contamination and drying of the Ink.

The use of a Lint Catcher or Overcoat Clear for Dark Fabrics will aid in uninterrupted production and reduce fibrillation. Create a single screen by combining all of the colors in the image to be printed on a dark 100% cotton fabric. Print using a suitable Primer Clear through a 230 mesh count and then flash cure.

The Use as a White Underbase is a must on All Garment Colors other than White.

Use a 110-280 Mesh Screens and a Print/Flash/Print maybe required on some Materials to deal with High Fibrillation and depending on the color you are trying to achieve.

For Best Results A Heavy Flood and Slow to Moderate Squeegee Pressure on Automatic Presses and Heavy Flood and Light to Moderate Squeegee Pressure on Manual Presses is recommended. A Print /Flash/Print Method will achieve the best results

Cure Ink at 320°-340°F (160°-170°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 90 to 180 seconds, depending on amount of ink deposit and color of garment.

Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.

Clean-Up can be done using Bio-Degradable Screen Wash

Re-Use or Dispose of any Unused Ink Properly

Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.

Manufactured By: Allureglow USA Inc. and Allureglow USA Inc. makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. (888) 493-4569 or www.allureglowusa.com

The Allureglow USA PS-1000-FL-RR Ink is a Fluorescent Red Ink that emits Red Under Blacklights. All of the PS-1000-FL Inks are manufactured using only Phthalate Free Plasticizers and are compliant with all State and Federal Regulations concerning Phthalates.

The PS-1000-FL Inks, enable the screen printer to print on either light or dark garments. This Ink can also be used on all types of fabrics and with the addition of our AG-CLA-100 Additive you can print on Polyesters Fabrics. Consult SDS prior to using.

Directions and Helpful Information:

The PS-1000-FL Inks are a  Single Component Ready to Use Ink, just mix it up and it is ready to use. Mixing should be done with a high speed drill or drill press using a Type 2 Dispersion Blade. Continue to mix Ink occasionally throughout production run.

Keep lids on containers to avoid contamination and drying of the Ink.

The use of a Lint Catcher or Overcoat Clear for Dark Fabrics will aid in uninterrupted production and reduce fibrillation. Create a single screen by combining all of the colors in the image to be printed on a dark 100% cotton fabric. Print using a suitable Primer Clear through a 230 mesh count and then flash cure.

The Use as a White Underbase is a must on All Garment Colors other than White.

Use a 110-280 Mesh Screens and a Print/Flash/Print maybe required on some Materials to deal with High Fibrillation and depending on the color you are trying to achieve.

For Best Results A Heavy Flood and Slow to Moderate Squeegee Pressure on Automatic Presses and Heavy Flood and Light to Moderate Squeegee Pressure on Manual Presses is recommended. A Print /Flash/Print Method will achieve the best results

Cure Ink at 320°-340°F (160°-170°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 90 to 180 seconds, depending on amount of ink deposit and color of garment.

Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.

Clean-Up can be done using Bio-Degradable Screen Wash

Re-Use or Dispose of any Unused Ink Properly

Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.

Manufactured By: Allureglow USA Inc. and Allureglow USA Inc. makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. (888) 493-4569 or www.allureglowusa.com