This Allureglow USA PS-1000 Inks are all Non-Phthalate, Vibrant Colors and Soft Hand Plastisol Screen Printing Ink. The PS-1000 Inks are manufactured using only Phthalate Free Plasticizers and are compliant with all State and Federal Regulations concerning Phthalates.
Allureglow PS-1000 White can be used as a Underbase or Finished Color and offers the Whitest White of Any Plastiol Ink on the Market today. The PS-1000 Inks, enable the screen printer to print on either light or dark garments. This Ink can also be used on all types of fabrics and with the addition of our AG-CLA-100 Additive you can print on Polyesters Fabrics. Consult SDS prior to using.
Directions and Helpful Information:
The Allureglow USA PS-1000 Inks are a Single Component Ready to Use Ink, just mix it up and it is ready to use. Mixing should be done with a high speed drill or drill press using a Type 2 Dispersion Blade. Continue to mix Ink occasionally throughout production run.
Keep lids on containers to avoid contamination and drying of the Ink.
The use of a Lint Catcher or Overcoat Clear for Dark Fabrics will aid in uninterrupted production and reduce fibrillation. Create a single screen by combining all of the colors in the image to be printed on a dark 100% cotton fabric. Print using a suitable Primer Clear through a 230 mesh count and then flash cure.
For Use as a White Underbase use a 110-160 Mesh Screens and a Print/Flash/Print maybe required on some Materials to deal with High Fibrillation.
For Best Results A Heavy Flood and Slow to Moderate Squeegee Pressure on Automatic Presses and Heavy Flood and Light to Moderate Squeegee Pressure on Manual Presses is recommended. A Print /Flash/Print Method will achieve the best results
The PS-1000 can be printed using 86-300 Mesh Screens depending on the color you are trying to achieve.
Cure Ink at 320°F (160°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 90 to 180 seconds, depending on amount of ink deposit and color of garment.
Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.
Clean-Up can be done using Bio-Degradable Screen Wash
Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.
Manufactured By: Allureglow USA and Allureglow USA makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. (888) 493-4569 or www.allureglowusa.com
Call Us At: (888) 493-4569
Email Us At: Info@allureglowusa.com
Allureglow USA Inc.
9450 7th Street Unit H
Rancho Cucamonga, CA 91730
