Allureglow USA DC Series Discharge Reflective Screen Printing Inks

DC Series Reflective Screen Printing Inks   

This Allureglow DC Series Discharge Reflective Screen Printing Inks are a Premium High Quality Ink, designed for printing on 100% Dischargeable Cotton Garments. Just add the Discharge Acitvator and you are ready to print. This unique Inks look like a Standard Color in normal light and have incredible Reflective Properties when light is shined on the print. This DC Series Reflective Screen Printing Ink, is an excellent enhancement to any garment with it’s Cool Reflective Properties.

Directions and Helpful Information: 

The Allureglow USA DC Series Reflective Ink needs to be activated using 4-6% by weight of Discharge Ink Activator. Add the correct amount of Activator and Mix Well and Allow to sit 20-30 Minutes before Using. Mixing should be done with a high speed drill or drill press using a Dispersion Blade. Continue to mix Ink occasionally throughout production run.

Always Keep lids on containers to avoid contamination and drying of the Ink. 

For Best Results A Heavy Flood and Moderate to Heavy Squeegee Pressure on Automatic Presses and Heavy Flood and Moderate to Heavy Squeegee Pressure on Manual Presses is recommended.

Allureglow USA DC Series Glow in the Dark Ink can be printed using 86-110 Mesh Screens

Cure Ink at 320°F (160°C) Always Test Dryer Temperatures prior to and during production. Curing Time will be between 2 - 3 Minutes, depending on amount of ink printed and color of garment and the type of dryer you have.

Always perform wash test prior to production, to ensure proper adhesion to the fabric, prior to production runs.

Clean-Up can be done using Soap & Water

Testing and viewing can best be done in a dark room or hallway, placing the Print approximately 10 feet away from you, take a charged flashlight and place it between your eyes and shine the light on the Print, you will see the bounce back effect or reflecting of the ink.

For best long-term durability wash in cold water on the delicate cycle and wash inside out. Do Not Use Bleach. Do Not Iron on Print. Line or Hang Dry.

Any application not referenced in this Technical Data should be pre-tested prior to any production run is done.

Manufactured By: Allureglow USA and Allureglow USA makes no representation as to the suitability of any given products; it is up to the buyer or user to determine if the product is suitable for the given application. To Contact Us Call: (888) 493-4569 or email: info@allureglowusa.com

 Click on the Link for a Copy of the DC Series Reflective Ink TDS

Click on the Link for a Copy of the DC Series SDS