Allureglow USA Solvent  Based Reflective Screen Printing Inks

The Allureglow USA SB Series Solvent Based Reflective Inks are formulated to print on a variety of substrates including: Treated Polyethylene, 

Treated Polypropylene, Coated Wood, Coated Metal, Vinyl, Nylon, Leather, PVC, Tyvek and many more Flexible Substrates. 

This unique Ink looks like a conventional Ink in normal light and has remarkable reflective properties when light is shined on it.

Directions and Helpful Information:
For Best Results, Always High Speed Mix Inks throughly with the proper diameter

Type 2 Dispersion Blade and either a High Speed Drill or Drill Press, prior to using. 

Keep lids on containers to avoid contamination.
Do Not Mix With Any Other Inks
Do Not Underprint Any Color Garment

SB-2045-RR Can be printed using a Single Pass using 110-160 Mesh Screens. Note: A Double pass can be done to improve color, however some reflectivity may be lost.
The SB-2045 Inks will air dry in 10 to 20 minutes at normal room temperature. Force drying in seconds at 90°to 150°F (32°to 66°C).

To prevent the blocking of material after printing, it is paramount to ensure that the temperature of the drying is not excessive and the air flow surrounding the material is good. Material blocking may occur if sheets are stacked when warm. 

Always perform Adhesion Tests prior to production, to ensure proper adhesion to the Substrate, prior to production runs.

Clean-Up can be done using Eco Solvents, Solvents or Mineral Spirits 

Testing and viewing can be best done in a dark room, place print at least 10 feet away from you, place a good flashlight between your

eyes and point at the print, the light should reflect back at the viewer.

Any application not referenced in this Technical Data should be pre-tested prior to any production run is begun.

Manufactured by: Allureglow USA Allureglow USA makes no representation as to the suitability of any given products; it is up to the

buyer or user to determine if the product is suitable for the given application. For more information email: info@allureglowusa.com or

Call (888) 493-4569 

Click on any of the links below to download the Allureglow USA Technical Data & SDS Sheets.

ALLUREGLOW USA SB SERIES GLOW IN THE DARK TDS

ALLUREGLOW USA SB SERIES REFLECTIVE TDS
  

ALLUREGLOW USA SB SERIES SDS

NOTE: All Standard Colors are suitable for Outdoor Use 

Fluroescent Colors are for Indoor Use Only Fluroescent Colors will fade if Used Outdoors

Colors may vary depending on the type of Ink Used  

Consult Technical Data and Safety Data Sheets prior to using any Allureglow USA Products

For Technical Assistance Call (888) 493-4569